• Deodorizes and enzymatically cleans hard surface areas.
  • Incrementally breaks down and removes organic buildup on surface or drain.

ABS-SBG™ is designed for use in food service and food preparation facilities where organic odors and organic accumulation are a problem. When used as directed, ABS-SBG™ will enzymatically clean hard surface areas, inanimate surfaces such as floors, shower stalls, stools and drains.  In addition, ABS-SBG™ will deodorize those areas that generally are hard to keep fresh smelling such as garbage storage areas, empty garbage dumpsters and cans, restrooms and other areas that are prone to odor caused by microorganisms.  ABS-SBG™ is a special blend of enzymes, odor counteractants and fragrances. ABS-SBG™ will incrementally break down and remove organic buildup on the surface or in the drain.

Direction for use and application rate:

For Surface Odor Control
Pre-clean surface to be treated and thoroughly saturate the area with ABS-SBG™ dilution. Let stand wet for 15 minutes and wipe off with a clean cloth or rinse with water. For very porous surfaces or hard to clean areas, repeat daily until the surfaces are clean and odor-free. CLEANING – Hold container 15 to 20 ml from surface to be treated. Spray area until it is covered with the solution. Allow product to penetrate and remain wet for 10 minutes. No scrubbing is necessary. Wipe off with a clean cloth, mop or sponge. The product will not leave grit or soap scum. For heavily soiled areas, remove gross soil before treatment.
For Drain Odor Control
Pour 60ml directly into drain. The frequency of application depends upon organic accumulations in the drain line. If there is just a small amount of odor-causing organics in drain or P-trap one application may be sufficient. For heavy organic accumulations in the drain line, repeat daily until drain runs free. NOTE:  ABS-SBG™ dilution should be used during the longest period of non-use, generally at the close of day.

For Controlling Mildew
To control mold and mildew on pre-cleaned, hard non-porous surfaces, spray surface to be treated making sure to wet completely. Let air dry. Repeat application at weekly intervals or when mildew growth appears.

Storage:

  • For optimal shelf life, store product in cool space under 100°F(38°C). Do not store in direct sunlight.
  • Keep container tightly closed when not in use.
  • Keep out of reach of children.