• Packaged in easy-to-use water soluble bags!
  • Reduces BOD, COD, & SS in municipal and industrial wastewater treatment effluent.
  • Improves recovery time from upsets.
  • Increases municipal and industrial wastewater treatment system capacity.
  • Improves floc settling formation, thus preventing sludge.
  • Improves waste degradation of specific target compounds.
  • Enhances the stability of municipal and industrial wastewater treatment systems.
  • Enhances odor control through natural organic acid oxidation.
  • Environmentally-friendly, biodegradable component for broader activity spectrum.

 

ABS-WP-WS™ is used for improving efficiency and odor control in a variety of industrial and municipal wastewater treatment plant ABS-WP-2012facilities. ABS-WP-WS™ contains powerful waste-digesting enzymes, essential nutrients, and specifically-selected strains of enzyme-producing beneficial microorganisms to degrade all the principle organic constituents normally found in municipal and industrial wastewater treatment facilities.

Direction for use and application rate:

The proper daily amount of ABS-WP-WS is determined by the total weight of wastewater in your system.

Example: In a 100 cum3 wastewater treatment plant systems, multiply 100 cum3 by 1,000 liters/cum3 by 1 kg per liter by 2 parts and divided by 1,000,000. This equals 200 g of ABS-WP-WS per day to be used for normal preventative maintenance treatment.

100 cum3 x 1 000 liter/cum3 x 1 kg/l x 2 parts/1,000,000

Note: Initial treatment of any waste system should be double the dosage of ABS-WP-WS™ required for normal preventative maintenance.

Calculate the weight of the total organic contaminated wastewater flowing into the waste treatment system and add 5 to 10 ppm of ABS-WP-WS™ by weight. During normal maintenance, the point of application should be in an area which allows the product maximum time in the system. For lagoon systems: 1# of ABS-WP-WS™ /acre foot/week. (Example: 3#’s/million gallons. These normal preventative maintenance rates are based upon:

  • BOD ranges of 250 to 1500 mg/
  • Minimum retention of 1 day.
  • Optimum pH range of 6.5 to 7.5.
  • Maximum water depth of 12 feet.
  • Negative effects on biological growth rates are possible in the presence of varying concentrations of heavy metal in the mix liquor solution, i.e. mercury, hexavalent chromium, and inorganic cyanide wastes.

Storage:

  • For optimal shelf life, store product in cool space under 100°F(38°C). Do not store in direct sunlight.
  • Keep container tightly closed when not in use.
  • Keep out of reach of children.

Packaging:

Buckets and fiber board drums depending on quantity ordered. For bulk, see ABS-WP™.